Share your VPN Experience
Cisco has made changes for the Security exams by replacing the old CCSP with the new CCNP Security Certification with 4 modules: Secure, Firewall, IPS and VPN. In fact, the old CCSP and the new CCNP Security are very similar. Many candidates have requested us to put up materials for these new exams but it is a time-consuming work. In the mean time, we created the “Share your experience” for the VPN exam. We really hope anyone who read securitytut, 9tut, digitaltut, certprepare, networktut and voicetut contribute to these sections as your experience is invaluable for CCNP Security learners to complete their goals.
Please share with us your experience after taking the VPN 642-647 exam, your materials, the way you learned, your recommendations…
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned towda service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
Hi,
I need a stablew 300-208 questions I have 100 % stable questions for 300-209 and 300-210
about 210 exam I have short version of questions which is very Stable a passed 9xx on 19.12
if someone can help and I can help someone feel free to write me. I share the files for free.
nikolai112***@abv.bg
all the questions are discussed in the forum!
Thank you very much Guys that you have shared your experience here it is very helpful
Thank you in advance!
w w w.exam4lead.com/cisco/642-647-dumps.html
An engineer is troubleshooting VPN connectivity issues between a PC and ASA using Cisco AnyConnect
IPsec IKEv2. Which requirement must be satisfied for proper functioning?
A. PC certificate must contain the server-auth EKU.
B. The connection must use EAP-AnyConnect.
C. The SAN must be used as the CN for the ASA-side certificates.
D. profile and binary updates must be downloading over IPSec
I am also wondering about the correct answer.
Someone have some tips ?
Hola!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(523q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(462q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
@Octopus, it seems that answer is B. The connection must use EAP-AnyConnect.
https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/113692-technote-anyconnect-00.html
At the end of the page, it states:
Known Caveats:
The AnyConnect connection over IKEv2 to the ASA uses EAP-AnyConnect, a proprietary mechanism that allows simpler implementation.
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attluhack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming cotesnnections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)……………………
A. RSH
B. SdwGCP
D. TFTP
E. RTSP
Answer: CE
friends,
I have a summary of the exam 210-260, 300-206, 300-208, 300-209 and 300-210.
You only need these files to pass 100% confirmed.
Many know me, if you are interested please write to the following email.
ccnpswicth@ gmail. com///
hi everyone!
passed 300-209. Score 9xx
supremario.pdf valid
i had 7 new question.
1. what are 2 advantages get vpn over Easy VPN?
get vpn support multicast(select)
get vpn is highly scabale(select)
get vpn support hub and spoke
get has qos support
get has unique session keys
2. which i need to do to allow IKEv2 anyconnect access on the outside interface( picture ASDM)
IPsec ikev2 allow access must be checked (select)
dtls must be unchecked
ssl allow acess must be unchecked
3. two command use for debug ASA IKEv2
debug crypto ikev2 platform
debug crypto ikev2 protocol
4. which two types of serverfers can be used as distribution point for crls
http (select)
subordinate ca (select)
ldap
scp Iam not sure
sdp Iam not sure
5. picture with configuration tunnel interface. select which type of vpn
dmvpn (bc tunnel mode gre multipoint)
6. which algoritm must be used that superposition from attack
aes-192 (select)
sha-384
rsa-3072
ecdsa -384 (i am sure)
7. encruption couter is incrising and decruption counter is not. where is the problem
phase 2 (select)
acl
psk
peer address (not sure)
https:/*/od.lk/fl/MThfMTE2NTQ4M18
remove star from link
good luck everyone!
do not write @CCNP SWITCH.
he wants money)))))
@free
Thanks for sharing your results from your test, and congratulations on passing!
You can 100% confirm that the supermario dump is valid?
@Dylan
You can 100% confirm that the supermario dump is valid?
yup bc i ised it
d\d dmvpn
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that
the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
@free
I really appreciate you confirming that for me!
Thanks for explaining the DMVPN d/d as well. Any other tips for this exam?
@Dylan
you should look previous 7 pages in this forum
it’s enough for passing
@free labs are the same?
friends,
I have a summary of the exam 210-260, 300-206, 300-208, 300-209 and 300-210.
You only need these files to pass 100% confirmed.
Many know me, if you are interested please write to the following email.
ccnpswicth@ gmail. com/////
@Clint
yup
Hola!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(523q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(462q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connecwdtions by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
I have done my test!
Lab:
1. Clienless SSL VPN – BOOKMARKS (HQ-Server is for http, DMZ-Server-FTP is for ftp)
Simlet:
1. ASDM
D&D:
1. Encryption/Authentication
2. DMVPN phase/process (followed supermario’s answer)
3. VPN States
Copy link and paste in your browser
lop.by/L5V
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE….
Hello guys, anyone working on passing “300-209 SIMOS” let me know which is the most current dump to pass the test.
+ 506 60548832
Hi which dumb is the latest as it for right now ?? xx.q
Good day everyone!
I passed the exam a couple of days ago with extremely high points (almost 1000). What can I say?
1. All questions in my exam represented Supermario dump, plus, questions which @free described here (December 24th, 2019). Thank @free very much for those! Really!
2. I would suggest personally recheck @free answers on those questions (especially on “superposition”, “which two types of serverfers” questions).
3. I had all 4 D&D followed by Supermario dump, ASDM Simlet, BOOKMARKS Lab.
Many thanks to you tut, the community for your help all these years!
Good luck everyone on your exam!
thanks free. Hi Alejandro latest is what shared in previous pages the supermario one si valid and all those new questions from VARMa etc upto this page . what is your country mate i cna call in watsapp . am preparing too
Hi,
I am looking for 300-208 I have PL and Gio but I don’t know if they are still stable.
Does anyone passed the exam recently?
I have stable exams for 300-210 and 300-209 I can share them for free but I need 300-208
I will really appreciate you help.
Thankx in advance
pls write me if you can help me or if I can help u
nikolai112***@abv.bg
Is the question mark available in the exam simulation? in CLI
Are the answers correct on supermario 300-209 dump for Ikev2 ASA tunnel sim and D&D questions ?
did you all follow supermarios answers for DMVPN process execution or the alternative answer we see on the previous pages.
I was reading through comments on last pages. I agree with dmvpn steps. (supermario wrong) however i think GRE over Ipsec is correct on supermario
according to
hyyp:/*/ptgmedia.pearsoncmg.com/images/9781587201509/samplechapter/158720150X_CH14.pdf
Unlike IPsec, GRE permits routing protocols (such as OSPF and EIGRP) across the connection.
This is not the case with typical IPsec tunnels. IPsec tunnels can send IP packets, but not routing
protocols. Before the IP packets can travel through the IPsec tunnel, however, static routes are
necessary on each IPsec endpoint for routing awareness of the opposite end. This additional
configuration overhead does not scale well with a large number of IPsec tunnels.
I think supermarios answer is correct.
I have valid SPOTO dumps
If anyone is interested I can share the SPOTO dumps just on 30$. Total questions are 200 and very accurate.
Whatssappp +92-346-5363766
I agree with DMVPN process execution of Supermario
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
https://www.cisco.com/c/en/us/support/docs/security-vpn/dynamic-multi-point-vpn-dmvpn/116957-technote-dmvpn-00.html
Encryption/Authentication
ESP-SHA -> Authentication
ESP-MD5 -> Authentication
ESP-AES -> Encryption
ESP-3DES -> Encryption
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnips/configuration/xe-3s/sec-sec-for-vpns-w-ipsec-xe-3s-book/sec-cfg-vpn-ipsec.html
Hello guys, could you please share a link for a vce player to open super mario. the one I have is not working for it
Is this ans is correct or not…kindly comment
GRE over IPSec:
1- has a higher MTU
2- is designed to be completely stateless
IPsec VTI:
1- Limited to IP unicast and multicast traffic
2- can use dynamic routing protocol.
@Security, I think so.
Hi alejandro,
I am facing same issue. VCE file of Supermario in not opening but VCE of Passleader is opening and working.
vce software please, I have one but does not open super mario
Passed my exam supermario is valid questions after 200 and 7 new question shared on this forum before.
@Passed
Could you share the VCE file? the vce supermariov4 file from previous pages is corrupted.
It’s the pre-supermariov4 version 423Q
h*t*tps:*/*/ od.lk /fl/ MThfMTE2NTQ4NF8
I’ve compared it to the version4 PDF and there are a few different answers, but not many.
Also in version 4 there are some more questions than in this VCE.
But most of it can be done through this VCE
I hope this can help you
R82 Yes, I could no open it
passed, thank you for the feedback
@R82 No able to download vce at “htt* p:*//198.252.104.167/VCEPlayer.zip”
Hi alejandro,
Thanks for sharing but unfortunately link is not working.
@Alejandro, remove spaces and asterisks
h*t*tps:*/*/ od.lk /fl/ MThfMTE2NTQ4NF8
An Engineer must configure GETVPN to transfer over the network between corporate offices.which two options are the advantages to choose GETVPN over EZVPN? (TWO)
A. GETVPN is highly scalable any to any mesh topology
B. GETVPN has QoS support
C. GETVPN has unique session keys for improved security
D. GETVPN supports multicastE. GET VPN supports a hub-and -spoke topology
E. GET VPN supports a hub-and -spoke topology
what will be the ans: AC or BD
@Security, I think the correct answer is AD.
https://www.cisco.com/c/en/us/products/collateral/security/ios-easy-vpn/eprod_qas0900aecd805358e0.html
Table 5. Cisco Site-to-Site VPN Solution Comparison
Could you guys share the supermario dump ?
Thank you
@R82 i tried to open it but it says the file is corrupted. I can access the url.
404 Not Found
Please forward this error screen to 198.252.104.167’s WebMaster.
The server can not find the requested page:
Have anyone been recently ?
Hola!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(523q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(462q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
Someone know rights answer?
Hi,
Which exactly sim and lab occures the exam ? Question number from supermario script ?
Some comments to @Free questions – maybe someone has some extra details, if anyone sharing is highly appreciated:
1 what are 2 advantages get vpn over Easy VPN?
A. get vpn support multicast B. get vpn is highly scabale C. get vpn support hub and spoke D. get has qos support E. get has unique session keys
Correct answer:AB
2. which i need to do to allow IKEv2 anyconnect access on the outside interface( picture ASDM)
A. IPsec ikev2 allow access must be checked (select) B. dtls must be unchecked C. ssl allow acess must be unchecked
Correct answer: probably A
3. two command use for debug ASA IKEv2 A. debug crypto ikev2 platform B. debug crypto ikev2 protocol
Correct answer:AB
4. which two types of servers can be used as distribution point for crls
A. http (select) B. subordinate ca (select) C. ldap D. scp – Iam not sure E. sdp – Iam not sure
Correct answer: A,B looks ok but if CDP would be listed than I would go for CDP option together with B
CRLs (base and deltas) are published to CRL distribution points (CDPs). So in our scenarios, the separate Web server in the DMZ will become a new CDP. You can manually publish the CRL onto this new CDP, or you can automatically publish it. Automatic publishing is a whole lot easier but requires a one-way trust from the Web server (CDP) in the DMZ to the CA server in the intranet, and uses SMB traffic for this connection (which you can secure with IPsec). You would need to discuss the pros and cons of this design with your security guys. On the plus side, the connection is initiated by the trusted network only and the automation helps to reduce the possibility of the CRL not being accessible (which in turn, results in a rejected PKI connection). Manually publishing the CRL is the only option when there is no connectivity allowed between the intranet and the DMZ, and obviously carries a higher administrative overhead with a higher possibility of error.
h t t p s : / / techcommunity.microsoft.com/t5/configuration-manager-archive/how-to-publish-the-crl-on-a-separate-web-server/ba-p/272748
5. picture with configuration tunnel interface. select which type of vpn
A. dmvpn (bc tunnel mode gre multipoint)
Correct answer: A (not possible to derive from the question)
6. which algoritm must be used that superposition from attack
A. aes-192 B. sha-384 C. rsa-3072 D. ecdsa -384
Correct answer: possibly A or D – (not possible to derive from the question)
7. encryption counter is increasing and decryption counter is not. where is the problem
A. phase 2 B. acl C. psk D. peer address
Correct answer: A or B (but B seems to be more likely cause we are not receiving packages, that would be pointing out that the traffic is not correctly exempt from NAT)
Some comments to @Free questions – maybe someone has some extra details, if anyone sharing is highly appreciated:
1 what are 2 advantages get vpn over Easy VPN?
A. get vpn support multicast
B. get vpn is highly scabale
C. get vpn support hub and spoke
D. get has qos support E. get has unique session keys
Correct answer:AB
2. which i need to do to allow IKEv2 anyconnect access on the outside interface( picture ASDM)
A. IPsec ikev2 allow access must be checked (select)
B. dtls must be unchecked
C. ssl allow acess must be unchecked
Correct answer: probably A
3. two command use for debug ASA IKEv2
A. debug crypto ikev2 platform
B. debug crypto ikev2 protocol
Correct answer:AB
4. which two types of servers can be used as distribution point for crls
A. http
B. subordinate ca
C. ldap
D. scp
Correct answer: A,B looks ok but if CDP would be listed than I would go for CDP option together with B
CRLs (base and deltas) are published to CRL distribution points (CDPs). So in our scenarios, the separate Web server in the DMZ will become a new CDP. You can manually publish the CRL onto this new CDP, or you can automatically publish it. Automatic publishing is a whole lot easier but requires a one-way trust from the Web server (CDP) in the DMZ to the CA server in the intranet, and uses SMB traffic for this connection (which you can secure with IPsec). You would need to discuss the pros and cons of this design with your security guys. On the plus side, the connection is initiated by the trusted network only and the automation helps to reduce the possibility of the CRL not being accessible (which in turn, results in a rejected PKI connection). Manually publishing the CRL is the only option when there is no connectivity allowed between the intranet and the DMZ, and obviously carries a higher administrative overhead with a higher possibility of error.
h t t p s : / / techcommunity.microsoft.com/t5/configuration-manager-archive/how-to-publish-the-crl-on-a-separate-web-server/ba-p/272748
5. picture with configuration tunnel interface. select which type of vpn
A. dmvpn (bc tunnel mode gre multipoint)
Correct answer: A (not possible to derive from the question)
6. which algoritm must be used that superposition from attack
A. aes-192
B. sha-384
C. rsa-3072
D. ecdsa -384
Correct answer: possibly A or D – (not possible to derive from the question)
7. encryption counter is increasing and decryption counter is not. where is the problem
A. phase 2
B. acl
C. psk
D. peer address
Correct answer: A or B (but B seems to be more likely cause we are not receiving packages, that would be pointing out that the traffic is not correctly exempt from NAT)
What are two forms of SSL VPN? (Choose two.)
A. port forwarding
B. Full Tunnel Mode
C. Cisco IOS WebVPN
D. Cisco AnyConnect
Someone know ?
Hi,
Anybody has new update for 300-208 passleader
@Octopus
I think the answer must be A and B
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
Answer C
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
Correct Answer: D
Please ignore my previous ans
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
Correct Answer: B
What are two forms of SSL VPN? (Choose two.)
A. port forwarding
B. Full Tunnel Mode
C. Cisco IOS WebVPN
D. Cisco AnyConnect
Correct Ans: A & B
I have valid SPOTO dumps.
If anyone is interested I can share the SPOTO dump. Total questions are 200 and very accurate.
A guy will take exam tomorrow and I will update you.
Whatssappp +92-346-5363766
I have valid and very accurate SPOTO dumps 300-209 and 300-210.
If anyone is interested I can share it only for 50$. Total questions are 200 and very accurate.
A guy will take exam tomorrow and I will update you.
Whatssappp +92-346-5363766
Passed today 300-209 905/1000
Super Mario Dumps and the questions below enough to pass the exam. I’m just not sure if all answers are correct in the dump and below answers as I didn’t perfect it but enough to pass
Some comments to @Free questions – maybe someone has some extra details, if anyone sharing is highly appreciated:
1 what are 2 advantages get vpn over Easy VPN?
A. get vpn support multicast
B. get vpn is highly scabale
C. get vpn support hub and spoke
D. get has qos support E. get has unique session keys
Correct answer:AB
2. which i need to do to allow IKEv2 anyconnect access on the outside interface( picture ASDM)
A. IPsec ikev2 allow access must be checked (select)
B. dtls must be unchecked
C. ssl allow acess must be unchecked
Correct answer: probably A
3. two command use for debug ASA IKEv2
A. debug crypto ikev2 platform
B. debug crypto ikev2 protocol
Correct answer:AB
4. which two types of servers can be used as distribution point for crls
A. http
B. subordinate ca
C. ldap
D. scp
Correct answer: A,B looks ok but if CDP would be listed than I would go for CDP option together with B
CRLs (base and deltas) are published to CRL distribution points (CDPs). So in our scenarios, the separate Web server in the DMZ will become a new CDP. You can manually publish the CRL onto this new CDP, or you can automatically publish it. Automatic publishing is a whole lot easier but requires a one-way trust from the Web server (CDP) in the DMZ to the CA server in the intranet, and uses SMB traffic for this connection (which you can secure with IPsec). You would need to discuss the pros and cons of this design with your security guys. On the plus side, the connection is initiated by the trusted network only and the automation helps to reduce the possibility of the CRL not being accessible (which in turn, results in a rejected PKI connection). Manually publishing the CRL is the only option when there is no connectivity allowed between the intranet and the DMZ, and obviously carries a higher administrative overhead with a higher possibility of error.
h t t p s : / / techcommunity.microsoft.com/t5/configuration-manager-archive/how-to-publish-the-crl-on-a-separate-web-server/ba-p/272748
5. picture with configuration tunnel interface. select which type of vpn
A. dmvpn (bc tunnel mode gre multipoint)
Correct answer: A (not possible to derive from the question)
6. which algoritm must be used that superposition from attack
A. aes-192
B. sha-384
C. rsa-3072
D. ecdsa -384
Correct answer: possibly A or D – (not possible to derive from the question)
7. encryption counter is increasing and decryption counter is not. where is the problem
A. phase 2
B. acl
C. psk
D. peer address
Correct answer: A or B (but B seems to be more likely cause we are not receiving packages, that would be pointing out that the traffic is not correctly exempt from NAT)
I have done my test!.
Lab:
1. Clienless SSL VPN – BOOKMARKS (HQ-Server is for http, DMZ-Server-FTP is for ftp)
Simlet:
1. ASDM
D&D:
1. Encryption/Authentication
2. DMVPN phase/process (followed supermario’s answer)
3. VPN States
Copy link and paste in your browser
lop.by/L5V
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
Answer C
friends,
I have a summary of the exam 210-260, 300-206, 300-208, 300-209 and 300-210.
You only need these files to pass 100% confirmed.
Many know me, if you are interested please write to the following email.
ccnpswicth@ gmail. com//////
Hi all im am going today, will update in 10-12 hours
Refer to the exhibit. An engineer has configured two new VPN tunnels to 172.18.1.1 and 172.19.1.1
However, communication between 10.1.0.10 and 10.1.11.10 does not function.
What is the reason?
A. NAT-T is disable
B. The remote peer 172.17.1.1 doesn’t support AES256
C. overlapping crypto ACL
D. invalid route
Answer: A, B or C
I think the correct answer is C.
object network RemoteNet2
subnet 10.1.10.0 255.255.254.0
object network RemoteNet3
subnet 10.1.11.0 255.255.255.0
access-list cmap20 extended permit ip object InsideNet object RemoteNet2
access-list cmap30 extended permit ip object InsideNet object RemoteNet3
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
Answer C
Is it C or B. Its confusing almost to everyone. Any reference link for the Answer C as IKEv2 always uses authentication local pre-share or rsa-sig method.
About my question:
Which command configures IKEv2 symmetric identity authentication?
A. match identity remote address 0.0.0.0
B. authentication local pre-share
C. authentication pre-share
D. authentication remote rsa-sig
In my router I configure proposal ikev2 and this is the cli output:
R1(config-ikev2-profile)#authentication ?
local Set local authentication method
remote Set remote authentication method
So I think B is correct.
Hi All.
I passed today with 96x Mario dump is valid.
I regards to symmetric Ikev2. Only the preshare C can be correct. Since you can have differet Local/remote preshares. but it is only both remote and local taht covers beeing “symmetric”
A. NAT-T is disable
B. The remote peer 172.17.1.1 doesn’t support AES256
C. overlapping crypto ACL
D. invalid route
Answer: A, B or C
I think the correct answer is C.
Agreed.
In the ASDM SIM with sh crypto(ike,ipsec, transform) they have changed the answers, but the way to find them are stikkl tha same, the tag was nbot ousidemap_1 anymore but one of the other options, i also had the one where they ask for NAME rather than protocols so it was TSET and non the 3DES.
Bookmarks HQ/FTP ( remember it is a FTP url and not HTTP as the answer in supermario says
HAD D/D
GRE
Routing/stateless
Ipsec
Mtu/Multicast
DMVPN process(I used the below as answers)
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
Enc
3DES
AES
Authentication
MD5
SHA
@Octopus –> The correct answer is B
@GOing today Congratulations!
Today A guy from Panama has passed 300-210 exam. He got 95x
Please find candidate reviews under below URL. Remove spaces
(300-206 and 300-209 Reviews)
https: // drive.google.com/drive/folders/1ZEwzqwWXwz2z7w70b9u2564y9g5b7qD2?usp=sharing
(300-210 Reviews)
https: // drive.google.com/drive/folders/1wQj_aHRQXg1Ifm3ExMn_L5AXUr9dw0wv?usp=sharing
If have 300-206, 300-209 and 300-210 SPOTO Dumps. If anyone is interested I can share SPOTO dumps only for 50$
My whatssapp +92-346-5363766
You must implement DMVPN Phase 3 by using EIGRP as the dynamic routing protocol for the tunnel
overlay.
Which action do you take to allow EIGRP to advertise all routes between the hub and all the spokes?
A. Summerize routes from the hub to the spokes
B. Configure the hub to set itself as the next hop when advertising networks to the spokes
C. Add a distribute list to permit the spoke subnets and deny all other networks
D. Disable split-horizon for EIGRP on the hub
Correct Answer: D
I think A is correct
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/211292-Configure-Phase-3-Hierarchical-DMVPN-wit.html
A company wants to validate hosts before allowing them on the network via remote access VPN.
Which Dynamic Access Policies (DAP) method provides additional host level validation?
A. TACACS check
B. folder check
C. file check
D. hostname check
Correct Answer: D
I think C is correct
An engineer is troubleshooting IPsec VPN and wants to show each phase2 SA build as well as the amount of traffic sent. Which command accomplishes that goal?
A. show crypto esp sa
B. show crypto isakmp sa
C. show crypto engine connection active
D. show crypto ipsec sa
Correct Answer: D
I think C is correct.
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409-ipsec-debug-00.html#crypto_engine
show crypto engine connection active
This command shows each phase 2 SA built and the amount of traffic sent. Since phase 2 (security associations) SAs are unidirectional, each SA shows traffic in only one direction (encryptions are outbound, decryptions are inbound).
What’s the best dumps for the 209 and how do you get the supermario pdf
@GOing today
What is the MTU/Multicast and Routing/stateless D/D?
Which option is the main difference between GET VPN and DMVPN?
A. AES encryption support
B. dynamic spoke-to-spoke tunnel communications
C. Next Hop Resolution Protocol
D. Group Domain of Interpretation protocol
Correct Answer: B
I think D is correct
@R82,
The corrct Answer is D. on the ASA, when you even type sh crypto ? engine is not an option for you to continue.
@Demus
On a router
Router1#show crypto engine connections active
Crypto Engine Connections
ID Type Algorithm Encrypt Decrypt LastSeqN IP-Address
1779 IKE SHA+AES256 0 0 0 192.168.220.1
4909 IPsec 3DES+MD5 0 169 169 192.168.220.1
4910 IPsec 3DES+MD5 160 0 0 192.168.220.1
@R82
both commands works on Router but only one works on an ASA. Meaning if you use ASA as your VPN Concentrator, you cannot show each pahse 2?
Which command will prevent a group policy from inheriting a filter ACL in a clientless SSL VPN?
A. vpn-filter none
B. no vpn-filter
C. filter value none
D. filter value ACLname
Correct Answer: A
I think C is correct
Specify the ACL for Clientless SSL VPN Sessions
Specify the name of the ACL to use for clientless SSL VPN sessions for this group policy or username by using the filter command in webvpn mode. Clientless SSL VPN ACLs do not apply until you enter the filter command to specify them.
To remove the ACL, including a null value created by issuing the filter none command, enter the no form of this command. The no option allows inheritance of a value from another group policy. To prevent inheriting filter values, enter the filter value none command.
ACLs for clientless SSL VPN sessions do not apply until you enter the filter command to specify them.
You configure ACLs to permit or deny various types of traffic for this group policy. You then enter the filter command to apply those ACLs for clientless SSL VPN traffic.
hostname(config-group-webvpn)# filter {value ACLname | none }
hostname(config-group-webvpn)# no filter
https://www.cisco.com/c/en/us/td/docs/security/asa/asa98/configuration/vpn/asa-98-vpn-config/webvpn-configure-policy-groups.html
@Demus
true, you’re right
An engineer is troubleshooting IPsec VPN and wants to show each phase2 SA build as well as the amount of traffic sent. Which command accomplishes that goal?
A. show crypto esp sa
B. show crypto isakmp sa
C. show crypto engine connection active
D. show crypto ipsec sa
Correct Answer: D
Which two changes must be made to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is
configured? (Choose two )
A. Disable EIGRP next-hop-self on the hub.
B. Enable EIGRP next-hop-self on the hub.
C. Add NHRP shortcuts on the hub.
D. Add NHRP redirects on the hub.
E. Add NHRP redirects on the spoke.
Correct Answer: AD
I think CD is correct
Phase 3 Configuration
Phase 3 is simple to configure.
Starting at the hub tunnel, disable “no ip next-hop-self eigrp x” and enable “ip nhrp redirect.” Redirect tells the spokes that there is a shorter way to reach other spokes.
R1(config)# int tun 0
R1(config-if)#ip next-hop-self eigrp 100
R1(config-if)#ip nhrp redirect
https://networkingjournalblog.wordpress.com/2017/05/04/dmvpn-configuration-phase-3/
@Dylan
January 9th, 2020
If you have the Supermario from previous pages it is
QUESTION 427
Drag and Drop Question
Gre over IPsec = Can use dyn routing / Designed to be stateless
Ipsec VTI = Higher MTU / Unicast+multicast
Sorry, I wanted to say that I think the correct answers are BD
DMVPN process
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
Is this correct and final one agreed by everyone?
@Ras, agree
https://www.cisco.com/c/en/us/support/docs/security-vpn/dynamic-multi-point-vpn-dmvpn/116957-technote-dmvpn-00.html
4. which two types of servers can be used as distribution point for crls
A. http
B. subordinate ca
C. ldap
D. scp
**** I think the correct answer is AC ****
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_pki/configuration/xe-3s/sec-pki-xe-3s-book/sec-cfg-auth-rev-cert.html
The method of the CDP determines how the CRL is retrieved; some possible choices include HTTP, Lightweight Directory Access Protocol (LDAP), SCEP, or TFTP. HTTP, TFTP, and LDAP are the most commonly used methods. Although Cisco IOS software defaults to SCEP, an HTTP CDP is recommended for large installations using CRLs because HTTP can be made highly scalable.